Click Finish to restart the system. The values you set for the temperatures are the maximum thresholds for the system for warnings, and the value for fan speeds are the minimum thresholds. Also, it provides the instructions on connecting the periph- eral devices, such as the mouse, keyboard, etc. To print the manual completely, please, download it. In the left side it shows the current system status, including the Vcore, 3. After replacing the hard drive, boot into BIOS and select Choose replacement drive and rebuild to rebuild the broken array.

Uploader: Togor
Date Added: 17 July 2013
File Size: 46.73 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 88849
Price: Free* [*Free Regsitration Required]

Even though 64KB is the recommended setting for most users, you should choose the block size value which is best suited to your specific RAID usage model. I tried different speakers but it didnt change the situation.

Press down the load lever lightly After the software is finished installation, it will automati- cally started every time Windows is initiated. S3-related functions described in this section are available only when your BIOS supports Sstar sleep mode.

Confirm if your CPU cooler is firmly installed before turning on your micdo. Thanks in advance again. As you understand from the subject, I have MS mobo and I have some ram problems with it.


MSI MS-7222 Manuals

You can download the VIA 4 in 1 drivers for micdo board, it should include the sound drivers for you. The Optimized Defaults are the default values set by the mainboard manufacturer specifically for optimal performance of the mainboard. If you do not have the CPU cooler, contact your dealer to purchase and install them before turning on the computer. Got it, continue to print.


The problem is solved. Hardware Setup Hardware Setup Chapter 2. I doubt whether Audiio did something wrong? Click the audio icon from the window tray at the lower-right corner of the screen. Click on the object in the left window pane to display the status of the object in the right windowpane. Push down the cure the lever with the hook under cooler until its four clips get retention tab. Enter text from picture: Pm8pm-ilPm8pm-l mocro, Pm8pm-vMs – pm8pm-l motherboard – micro atxPm8pm.

ALC allows the board to attach 4 or 6 speakers for better surround sound effect. Front Panel Audio Connector: I installed the driver successfully and win 7 recognize the card without any problem.

MSI – PM8PM-V V sound card problem!!

BUT, there is no any voice again!! The utility is just like your PC doctor that can detect, view and adjust the PC hardware and system status during real time operation. Main reason was the situation on Sta which had been not configured correctly. Your packing contents may vary depending on the model you purchased.


Usb Connectors Tape player, or other audio devices. Tape player, or other audio aydio. So, where is the problem?? We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Please do not fold the serial ATA cable in a degree angle, since this might cause the loss of data during the transmission.

Hardware Setup Back Panel The back panel provides the following connectors: It introduces a 66MHz, bit channel for the graphics controller to directly access main memory.

Don’t show me this message again. I re-download new drivers froms MSI support and download web site, but the same result. Page 67 MS Micro-ATX Mainboard Connecting the Speakers When you have set the Multi-Channel Audio Function mode properly in the soft- ware utility, connect your speakers to the correct phone jacks in accordance with the setting in software utility.